石墨烯改性涂层防护性能研究

为减少团聚，提高石墨烯在涂层中的分散性，研究采用纳米分散技术预先制备了石墨烯分散液，再将其分散至环氧树脂中获得石墨烯改性复合涂层。通过对石墨烯含量为 0、0.3%、0.6%的复合涂层进行盐水浸泡、盐雾、阴极剥离实验及电化学性能测试，证明石墨烯的加入显著增强了涂层的防护性能。石墨烯复合涂层在 3.5%盐水中浸泡 1 008 h后，涂层低频阻抗仍大于 106 Ω·cm²比未添加石墨烯的涂层提高了 3个数量级，且盐雾实验 6 000 h后涂层表面仍保持完好；含 0.6%石墨烯，的涂层耐蚀行为劣于石墨烯含量为 0.3%的涂层。     

改性碱式氯化镁晶须/丁苯橡胶复合材料制备与性能研究

以工业活性轻烧氧化镁粉和盐酸为原料,采用水溶液法制备了碱式氯化镁晶须,继而采用硅烷偶联剂对碱式氯化镁晶须进行改性,然后将其与丁苯橡胶混炼得到改性碱式氯化镁晶须/丁苯橡胶复合材料,研究了改性碱式氯化镁晶须对丁苯橡胶力学性能及热学性能的影响。结果表明：采用水溶液法制备得到的碱式氯化镁晶须结构为Mg₂（OH）₃Cl·4H₂O,呈微细纤维状,分布较均匀,长径比大于20;改性碱式氯化镁晶须的加入,可以改善丁苯橡胶的机械强度和阻燃性能。     

Use of nets treated with food-grade coatings on dry-cured ham to control Tyrophagus putrescentiae infestations without impacting sensory properties

Dry-cured hams may become infested with the ham mite Tyrophagus putrescentiae during aging. Food-grade coatings have been developed to control mite infestations as a potential alternative to replace methyl bromide, but dipping or spraying these coatings requires additional labor and processing steps. Nets composed of polyester, a polyester/cotton blend and cotton were infused with coatings that consisted of propylene glycol, and either propylene glycol alginate and carrageenan or xanthan gum. Results indicated that the polyester/cotton blend and cotton nets that contained propylene glycol were effective at controlling mite infestations in assays with ham cubes covered in nets. The polyester nets slowed mite growth but were not effective at controlling mite reproduction due to low absorbance of the coatings. Polyester/cotton blend nets treated with coatings on whole hams were not different from control hams with respect to flavor, texture and moistness. Mite infestation tests on whole hams indicated that coated nets with greater stitch densities were effective at controlling mite growth. Future research will include the optimization of coating formulations and scaled-up testing in dry-cured ham plants.     

Modeling and surface texturing on surface roughness in machining LaPO4–Y2O3 composite

In this work, lanthanum phosphate with a 20% yttria (LaPO₄/Y₂O₃) composite prepared by an Aqueous Sol–Gel process is machined using an Abrasive Water Jet Machine (AWJM). The machinability of this composite is studied by varying the input parameters namely Jet Pressure (JP), Stand-Off Distance (SOD), and Traverse Speed (TS) on Surface finish. Garnet of 80 mesh size is used as an abrasive with a flow rate of 85?g/min. The microstructural characterization study reveals the presence of new element YPO₄. This element enhances the machinability and reduced porosity in the composite. Microscopy examinations on the machined surface reveals that partial overlapping at low JP, poor surface finish at high JP and SOD, forged deficiency at maximum SOD and TS. The minimum levels of all input parameters are influenced to obtain acceptable Ra. Atomic Force Microscopy (AFM) on the kerf surface shows micro wear track and peaks. The Multiple Regression Analysis (MRA) is developed for Ra to check the adequacy. From the Analysis of Variance (ANOVA), SOD has a significant effect on Ra with a contribution of 53%. The influence of JP and TS on Ra is found to be 31% and 15%, respectively.     

Ultrathin hydroxyapatite coating on pure magnesium substrate prepared by pulsed electron ablation technique

Magnesium (Mg) as a potential material for biodegradable implants is attractive due to its mechanical similarity to the bone tissue and nontoxic corrosion products. However, the rapid corrosion rate of bare magnesium is associated with hydrogen release, which may complicate the healing process. The corrosion rate may be reduced by suitable alloying, but concurrently the biocompatibility of such alloy might be deteriorated. Another way of reduction of the corrosion rate is coating. Hydroxyapatite (HA)-based coating is considered to improve biocompatibility as well as decrease the corrosion rate by the barrier effect. In this study, ultrathin (150 nm) HA and HA containing Sr coatings are deposited via pulsed electron ablation technique on pure Mg. The microstructure of the coating was assessed by scanning electron microscopy. Electrochemical methods were used to investigate the corrosion properties of prepared coatings. The materials covered by this layer were characterized by superior corrosion behavior, with corrosion rates of coated samples up to five times lower as compared with the uncoated ones. Such coating is the thinnest coating found in the literature sources.     

基于近似测地线的分层次自动铺带轨迹规划方法

自动铺带技术是一种增量制造技术，适用于制造翼面、壁板等大尺寸、小曲率复合材料构件，具有加工成本低、效率高等特点。轨迹规划是自动铺带技术的关键环节，它直接关系到复合材料构件的成型精度与质量。现有的自动铺带轨迹规划方法难以便捷兼顾调控铺放间隙与防止铺放褶皱，保证铺带产品的最终质量。有鉴于此，提出了一种基于近似测地线的分层次铺放轨迹规划方法。主要目标是合理利用预浸带允许变形能力，在防止铺放褶皱产生的前提下，保证相邻带料不产生覆盖，且间隙不超过2.5 mm。首先，研究了铺放间隙的产生与演化规律，给出了几种典型曲面上初始铺放间隙的优化方法。接下来，提出了近似测地线的数学模型与求解格式。然后，基于铺放褶皱的产生机制与铺放间隙的演化规律，确定了近似测地线的测地曲率大小与符号。最后，在双曲面模具以及自由曲面模具上验证了所提出方法的有效性。     

复合外加剂改性盐石膏的研究

盐石膏的主要成分为无水硫酸钙,其活性差、凝结硬化慢、强度低,需要添加活性剂来激发盐石膏的活性。通过复合外加剂对盐石膏加以改性,并通过XRD和SEM对其作用机理做了分析。结果表明,单掺脱硫石膏和建筑石膏均能缩短盐石膏的凝结时间,建筑石膏的效果较好,但掺量不宜过高。复掺建筑石膏和缓凝剂时,两者比例要控制得当,适宜的建筑石膏和缓凝剂掺量分别为50%和0.10%~0.12%（质量分数）。分析可知,大掺量建筑石膏会增加盐石膏硬化体中二水相和针棒状晶体的含量;缓凝剂掺量的增加,会降低盐石膏硬化体中二水相的含量,棱形晶体增多,从而降低了盐石膏的强度。     

Fabrication and Characterization of Highly Oriented Composite Nanofibers with Excellent Mechanical Strength and Thermal Stability

Here, highly‐oriented poly(m‐phenylene isophthalamide)/polyacrylonitrile multi‐walled carbon nanotube (PMIA/PAN‐MWCNT) composite nanofiber membranes with excellent mechanical strength and thermal stability are successfully produced using electrospinning. It is demonstrated that the cooperation of multi‐walled carbon nanotubes (MWCNT) and high‐speed rotating collection is beneficial to the acquisition of highly oriented fibers and effectively improves the mechanical strength of the membrane along the orientation direction. Specifically, the tensile stress of poly(m‐phenylene isophthalamide)/polyacrylonitrile (PMIA/PAN) membrane is enhanced significantly from 10.6 to 20.7 MPa, benefiting from the highly oriented alignment of the fibers as well as the reinforcing effect of MWCNTs on the fibers. Furthermore, the stressing process of single fiber and fiber aggregates is carefully simulated, and the influence of MWCNTs on the mechanical properties of PMIA/PAN‐MWCNT membranes is analyzed comprehensively, providing a meaningful auxiliary means for the study of mechanical properties. In addition, the composite nanofiber membrane has the advantages of both PMIA and PAN, possessing high temperature resistance, flame‐retardancy, and chemical stability, for an ideal high‐temperature material. In short, the as‐prepared PMIA/PAN‐MWCNT composite membrane with excellent comprehensive property emerges a promising application in many fields, especially in high‐tech.     

碳纤维复合材料修复带缺陷储气井的应力分析及试验研究

针对天然气储气井井管外壁腐蚀现状,采用有限元计算方法,分析不同外壁腐蚀类型、不同腐蚀缺陷尺寸下储气井井管的应力分布、承载极限及疲劳性能;加工带缺陷储气井井管试件,选择碳纤维复合材料湿缠绕法补强修复;对修复后的井管试件进行有限元应力分析,并进行爆破试验和疲劳试验,以充分验证补强方法的有效性;储气井井管的理论分析和性能试验证明,碳纤维复合材料湿缠绕法补强可以有效地修复带外壁缺陷的储气井井管,有效、快捷地解决在役天然气储气井井管外壁腐蚀问题。     

温度对化学镀锡层形貌和耐蚀性的影响

对不同温度下制备的化学镀锡层进行了电化学腐蚀试验。使用电化学工作站测试了交流阻抗谱,研究了温度对化学镀锡层形貌和耐蚀性的影响。结果表明:Nyquist图显示不同温度下所得化学镀锡层的电化学阻抗谱都呈现出简单的容抗弧特征,随着温度从40℃升高到80℃,容抗弧半径总体上先增大后减小;Bode图显示不同温度下所得化学镀锡层的相位角与频率之间的关系曲线形状相似,在测试频率范围内都只出现一个相角峰。温度为60℃时制备的化学镀锡层表面块状颗粒的尺寸和分布最均匀,容抗弧半径最大,并且在较宽频率范围内的相位角都接近70°,表现出较好的耐蚀性。